







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Concord Homeowners
A failing fence announces itself slowly: a gate that drags, pickets that lean after a windy week, a post that gives when you lean on it. In Concord’s mild winters and hot, dry summers, wood dries and splits, vinyl can yellow, and metal posts corrode where water sits. We install wood, chain link, vinyl, aluminum, iron, and specialty fencing for Concord homeowners who want a boundary that stays straight and a gate that closes for years, not one season. Our technicians have up to 12 years of experience, and we work from a broad supplier network including Barrette, Master Halco, Ameristar, and Jerith. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday. For a free estimate on fence installation in Concord, call (866) 611-9068.

What Our Fence Installation Service Includes

Fence installation covers the whole job: setting posts, building or assembling panels, hanging gates, and cleaning up. The material you choose and the way the posts are set decide how the fence holds up. Here’s how each type works and when it makes sense for a Concord property.
Wood Fence
A wood fence is the classic privacy solution, and it’s the most flexible for odd lot lines, slopes, and custom heights. You need wood when privacy, budget, or a traditional look matters most, and when you want to stain or paint to match the house. We set posts with proper depth and spacing for Concord’s soil, use rot-resistant species, and build panels that stay square and tight. We’ll talk through board styles, cap rails, and gate configurations so the finished fence looks intentional from both sides.
Chain Link Fence
Chain link is the workhorse: durable, low-maintenance, and the most economical way to enclose a yard for pets or kids. It’s the right call when you need a secure boundary without the cost of privacy materials, or when you’re fencing a large lot. We install galvanized and vinyl-coated chain link with tensioned top rails and clean post caps, and we can add privacy slats if you want more screening later.
Vinyl Fence
Vinyl fencing gives you the look of a painted wood privacy fence without the annual maintenance. It’s a good fit when you want a crisp, uniform appearance and don’t want to refinish every few years. We install Bufftech and ActiveYards vinyl systems, which come in a range of heights, colors, and styles, and we set posts so panels stay level and gates don’t sag.
Aluminum Fence
Aluminum fencing is the go-to for pool enclosures, front-yard boundaries, and anywhere you want security with an open view. It’s strong, rust-resistant, and holds its finish. We install Ameristar aluminum systems with welded or rackable panels to follow grade, and we set gates with proper hardware so they swing smoothly for years.
Iron Fence
Wrought and ornamental iron fencing delivers a heavy, traditional look that suits older Concord neighborhoods and formal landscapes. You need iron when security and curb presence matter, and when you want a fence that can be customized with finials, scrolls, and decorative pickets. We install Jerith iron systems and coordinate powder-coated finishes so the fence resists rust and weather.
Fence Repair
Fence repair covers the smaller failures that don’t justify a full replacement: a broken picket, a leaning post, a gate that won’t latch, or a section knocked down by a fallen branch. It’s the right first call when most of the fence is sound and only part of it needs attention. We assess the whole run, replace or reset what’s failed, and tell you honestly when repair stops making sense and replacement is the better spend.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Barrette and Master Halco are among the most common fencing systems on Concord properties, and we know how each one is built, from the post and rail profiles to the gate hardware. Barrette vinyl and wood-composite lines and Master Halco’s steel and ornamental systems each have their own quirks, and working with them regularly means we install panels and gates that fit and last.
Ameristar and Jerith cover the ornamental side of our work, and we install both regularly for front-yard boundaries, pool fencing, and driveway gates. Ameristar aluminum and Jerith iron systems each bring a distinct look and finish, and we match the product to your lot, budget, and style rather than pushing a single line. Whether you have a specific brand in mind or want us to recommend options, we can help. The same team also handles fence installation coordination with the rest of your exterior projects, so your boundary, driveway, and entry all line up.
Signs You Need Fence Installation Right Now
- Posts that lean or wobble. A post that moves when you press on it means the footing has failed or the wood has rotted below grade. Left alone, a single loose post starts pulling the whole run out of line.
- Gates that drag or won’t latch. A gate that scrapes the ground or swings open on its own is a sign the posts or hinges have shifted. It’s also a safety issue for kids and pets, so it’s worth fixing before someone gets out.
- Rotted or split boards and pickets. Soft spots, splintering, and boards that pull loose from the rails mean the material is past its useful life. Replacing a few boards is cheap; replacing a whole collapsed section after a storm is not.
- Rust, peeling, or faded finish. On metal fencing, bubbling paint and orange streaks point to corrosion that spreads. On vinyl, yellowing or cracking panels mean the material is degrading and new sections will look mismatched next to old.
- Storm or impact damage. A downed limb or a car backing into the fence can take out panels and posts in one go. We assess the damage, make it safe, and quote repair versus replacement honestly.
Our Fence Installation Process – Step by Step
- 1
Free on-site estimate. We walk the property line with you, check grades, look at existing posts and footings, and note gates, corners, and anything buried or obstructed. You get a written, line-item estimate so you know what each part of the job covers.
- 2
Material and layout planning. We help you choose between wood, vinyl, aluminum, chain link, or iron based on privacy needs, budget, and how the fence should look. We confirm setbacks and property lines, and we flag local permitting requirements where they apply so you can check with the city before work starts.
- 3
Permits and site prep. Where a permit is required, we help you get it and coordinate inspection. We mark utility lines before digging, clear the fence line, and protect landscaping during excavation.
- 4
Post setting and installation. We dig footings to the right depth and spacing for the material, set posts plumb, and build or assemble panels and gates. We check alignment as we go so the finished run is straight and gates swing cleanly.
- 5
Cleanup and final walk-through. We haul away old fencing and debris, walk the finished fence with you, and confirm gates, latches, and hardware work as they should. Any issues come up before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Concord?
Fence installation in Concord typically runs from $3,500 to $9,000 for a standard residential job, depending on material, length, and site conditions. A typical vinyl fence installation in Concord runs $3,500 to $9,000, while a typical aluminum fence installation runs $4,000 to $10,000. Those are estimated ranges; the written estimate sets the final price.

What affects the price:
- Linear footage. Longer runs cost more, but the per-foot price usually drops as the job grows.
- Material choice. Chain link is the most economical; wood, vinyl, and especially ornamental iron sit higher.
- Site conditions. Slopes, rocky soil, tight access, and old fence removal all add labor.
- Gates and corners. Each gate, post cap, and custom corner is extra labor and hardware.
- Permits and inspections. Where required, these add time and fees.
To avoid overpaying, get a written line-item estimate that separates materials, labor, removal, and permits. Ask what’s included and whether the price changes if site conditions surprise you. In our free estimates, we walk the property first and quote from what we actually see, not a phone guess.
Fence Installation Near Concord – Our Service Area
We serve Concord and the surrounding East Bay communities, including Pleasant Hill, Walnut Creek, Martinez, Alamo, Lafayette, Benicia, Moraga, Orinda, Rodeo, Hercules, and Piedmont. If you’re in one of these towns, we can usually quote from a single visit and schedule the work quickly. We also handle fence installation and fence installation for nearby homeowners who want the same materials and standards. Not sure if you’re in range? Call (866) 611-9068 and we’ll tell you.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Concord

Fence installation is the process of setting posts, building panels, and hanging gates to create a boundary around a property. It usually involves material selection, layout, digging footings, setting posts, and installing the fence sections. We handle the whole job, from the first estimate to final cleanup, so you don’t have to coordinate separate trades. Call (866) 611-9068 for a free estimate.
A typical residential fence installation in Concord takes one to three days, depending on the length of the run, material, and site conditions. A short chain link run can go up in a day; a long wood or iron fence with gates and slope work may take longer. We give you a realistic timeline in the written estimate before work starts. Call (866) 611-9068 to schedule yours.
Most fence installation in Concord runs between $3,500 and $9,000, with vinyl typically at $3,500 to $9,000 and aluminum at $4,000 to $10,000 depending on length and style. Those are estimated ranges; your written estimate sets the final price. Factors like material, gates, slope, and old fence removal shift the number. Call (866) 611-9068 for an exact quote, and estimates are free.
Yes, we install Ameristar aluminum and Jerith iron fencing regularly, along with Barrette, Master Halco, Bufftech, and ActiveYards systems. We match the product to your lot, privacy needs, and budget rather than pushing one line. If you have a specific brand or style in mind, we’ll source it. Call (866) 611-9068 to talk through options.
Same-day service is available when scheduling allows. We answer 24/7, and we offer fast dispatch from 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 611-9068 for a free estimate.
Warranty terms are confirmed in your written estimate for each project, so you know exactly what’s covered before work begins. Manufacturer warranties on the fencing material vary by brand and product line, and we’ll walk you through those. We don’t make blanket promises we can’t verify. Call (866) 611-9068 with questions about your project.
Clear the fence line of furniture, planters, and anything you want to keep out of the work area, and check whether any buried lines run near the boundary. We’ll mark utilities before digging. We confirm property lines and setbacks with you during the estimate. If you have questions about prep, call (866) 611-9068.
Schedule Your Fence Installation Service in Concord Today
If your fence is leaning, the gate won’t close, or you’re ready for a new boundary that fits your property, we’ll walk the lot and give you a written, line-item estimate. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 611-9068 for a free, no-obligation estimate on fence installation in Concord.
Written by the team at Construction Concord.












