







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Concord Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Concord, CA, for homeowners whose cabinets, islands, and kitchen layouts need installation, repair, or refacing. What makes our KraftMaid work different is focus: we know how these semi-custom and stock lines are built, where they fail in Concord’s climate, and how to fix them without selling a whole new kitchen.
KraftMaid covers a wide spread of quality tiers, from value stock lines to semi-custom configurations, so the right answer for one Concord kitchen is often wrong for the one next door. We work on all of it as an independent KraftMaid service provider. We are not affiliated with, authorized by, or endorsed by KraftMaid, and we’re not a dealer. We repair, install, and service KraftMaid cabinetry with quality parts that fit it. Our technicians have up to 12 years of experience, and we can talk through your Concord project at (866) 611-9068. We answer 24/7.
Why Trust Construction Concord for Your KraftMaid Construction?

KraftMaid builds cabinets, and cabinets fail in specific ways. That is the whole reason we’re useful here.
Our technicians have handled enough KraftMaid installs and repairs to read the symptoms quickly. A door that won’t sit flush usually points to hinge plate screws that have given way in the particleboard side, not to a warped cabinet box. Finish cracks at miter joints on stained raised-panel doors are seasonal wood movement, not a defect. Once you know which is which, the repair plan writes itself and you don’t pay for work the cabinet doesn’t need.
We match components to the cabinet rather than forcing a generic part to fit. Where OEM KraftMaid hardware is available, we use it for exact color and fit. Where it isn’t, we source aftermarket hinges, drawer slides, and touch-up finishes that meet or exceed the original spec. The goal is a repair that lasts and a finish that matches what you already own.
Warranty-safe practices matter with KraftMaid. We work in a way that avoids creating the conditions a manufacturer might point to as a reason to deny a claim, and we’re straight with you when a covered defect should go to KraftMaid first rather than to us. That’s the trusted expert part of the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Concord
Concord’s climate does a number on cabinetry. Dry inland summers pull moisture out of wood and panel products, wet winters push it back in, and repeated cycles find every weak joint. Here’s what we see most.
- Door warping or delamination on painted MDF doors. Common in the Vantage and Momentum lines. Painted MDF has a thin skin over a core, and when interior humidity swings hard between Concord’s dry summers and wet winters, that skin can lift at the edges or the door can bow. Catching it early usually means a door replacement or refinish; letting it go means the whole run starts to look uneven.
- Drawer box separation from the front panel. Heavy pots and canned goods load a drawer box from below, and on stock lines the joint is often stapled only. Over time, the staples loosen and the box pulls away from the drawer front. A proper repair re-secures the joint with mechanical fasteners and glue, not more staples.
- Soft-close hinges losing dampening or sagging. The hinge plate screws pull out of the particleboard cabinet side, and suddenly the door rides low and the soft-close quits damping. This is fixable without replacing the cabinet: fill and re-drill the holes, fit fresh hinges, and reinforce the side where needed.
- Finish cracking at miter joints on stained raised-panel doors. Wood moves with the seasons, and a miter joint is where that movement shows up first. Concord’s wet-dry cycle makes it predictable. Touch-up and re-sealing can hold it; repeated cracking across many doors is a sign the finish system needs a broader refresh.
- Hinge and slide wear on older installs. Hardware has a service life, and the cabinets from Concord’s 1980s subdivisions are well past it. The cabinet boxes are often fine while the moving parts are not. Swapping hardware is one of the higher-value repairs in a kitchen.
Here’s how this plays out in a typical kitchen. A homeowner notices several KraftMaid Vantage cabinet doors no longer close flush and the soft-close has stopped working. On inspection, the hinge screws have stripped out of the particleboard frame and the finish is cracking at the joints. A qualified installer typically fills and re-drills the hinge holes, fits OEM or heavy-duty aftermarket hinges, and may reinforce the cabinet sides. If several doors are affected, refacing or replacing the doors and drawer fronts is often the more sensible route.
KraftMaid Parts & Our Repair-vs-Replace Approach

We use OEM KraftMaid hardware and components when they’re available, because exact color and fit matter on a finished cabinet. When they aren’t, we source high-quality aftermarket hinges, drawer slides, and touch-up finishes that meet or exceed the original spec. We don’t stock KraftMaid parts and we don’t claim to. We find what fits your cabinet.
The repair-or-replace call comes down to breadth. A few doors and drawers misbehaving is a repair job, and often a very good one. When multiple cabinets show structural failure, or finish wear has spread across most of the kitchen, replacing the boxes and fronts can cost less than chasing repairs run by run and still end up with an uneven result. We’ll tell you which side of that line your Concord kitchen sits on before any work starts, and the written estimate sets the price.
Call (866) 611-9068 for a free estimate. We answer 24/7.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We look at what’s actually failing: door alignment, hinge plate condition, drawer box joints, finish condition at the miters, and the cabinet sides behind the hardware. With KraftMaid, that means separating cosmetic wear from structural problems, because they take different fixes.
- 2
Repair or install plan. You get a written line-item quote covering the hardware, any refinishing, and any cabinet or front replacement. We spell out whether OEM KraftMaid components are used or aftermarket equivalents, so there are no surprises.
- 3
Test. Every door gets opened and closed, every drawer pulled and pushed, and every soft-close checked for dampening. Alignment gets checked against its neighbors, not in isolation, because a kitchen reads as a whole.
- 4
Warranty and follow-up. We explain which repairs carry our workmanship warranty and which may still be covered by KraftMaid’s own warranty. Where a manufacturer defect is the issue, we point you to the right channel rather than charging you for something KraftMaid should handle.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Concord

We install and service KraftMaid cabinetry across the full range of its lines, including Vantage, Momentum, Aspire, and Choice. That means base cabinets, wall cabinets, tall cabinets, islands, and the doors and drawer fronts that go with them. We handle installation and refacing, kitchen design and layout, and small and partial remodels where a few cabinets change rather than the whole kitchen.
Concord’s housing stock shapes a lot of this. Post-WWII and mid-century homes and 1960s-70s ranchers often have kitchens sized for a different era, and many have original plumbing, wiring, and shallow foundations that come into play when a layout changes. We plan around that. On expansive bay-mud and clay soils, the ground itself shifts with the wet-dry cycle, so a kitchen remodel in Concord often means checking for soil-driven movement and older-home retrofits before the cabinets go in, not after.
We Also Service These Brands
We’re not a one-brand shop. Kitchen work also brings us to Kohler fixtures, and our other trades cover GAF roofing systems, PGT windows, and Master Halco fencing. That’s the point of working with a single-source contractor across seven trades. You can stage a kitchen remodel and a roof together and keep one point of contact instead of three.
FAQs – KraftMaid Construction Service in Concord
Is Construction Concord authorized by KraftMaid?
No. We are an independent KraftMaid service provider, not affiliated with, authorized by, or endorsed by KraftMaid, and we are not a dealer. We repair, install, and service KraftMaid cabinetry with quality parts that fit it. For warranty claims, we’ll point you to KraftMaid directly where that’s the right route.
Can I replace just the doors and drawer fronts on my KraftMaid Vantage cabinets?
Yes, and it’s often the smartest option when the cabinet boxes are sound but the fronts are tired or failing. Refacing lets you keep the layout and the box while changing the look and fixing the doors that no longer close flush. We assess whether warping or delamination has spread to the point where the boxes need attention too before we recommend it. Call (866) 611-9068 for an exact quote – estimates are free.
My KraftMaid Momentum cabinets have soft-close drawers that no longer close all the way. What is the fix?
The slide or the drawer box joint is usually the culprit, not the cabinet itself. On stock lines the box-to-front joint is often stapled, and heavy loads loosen it; replacing the slides and re-securing the joint with mechanical fasteners and glue typically resolves it. Call (866) 611-9068 for an exact quote – estimates are free.
How do I touch up scratches on my KraftMaid stained maple cabinets?
A color-matched touch-up pen or fill stick blended into the grain handles light scratches, and a thin coat of the matching topcoat blends it further. Deep scratches through the finish to bare wood are better addressed with a matched stain and topcoat than a wax stick, which won’t hold. We carry touch-up finishes that meet or exceed KraftMaid’s original spec and can match the color on site.
Are KraftMaid cabinets compatible with aftermarket organizers and accessories?
Generally yes. KraftMaid uses standard cabinet dimensions, so most aftermarket pull-out shelves, dividers, and organizers fit, provided you measure the interior opening rather than relying on the cabinet’s exterior width. The caveat is hardware: slides and hinges need to match the mounting pattern on your cabinet side, which is where an aftermarket part that looks right can fail to fit. We’ll tell you what will work before you buy.
What is the typical cost to install a KraftMaid kitchen island in Concord?
A typical estimated range for kitchen island installation in Concord is $3,000 to $10,000, depending on size, whether plumbing or electrical needs to move, and the countertop you choose. The written estimate sets the final price. Call (866) 611-9068 to schedule your free estimate. We answer 24/7.
Other typical estimated ranges for KraftMaid work in Concord:
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
How long does KraftMaid service take?
Hardware and door repairs are typically a day for a standard kitchen, while a refacing or a partial remodel runs longer depending on how many fronts change and whether countertops or a backsplash are involved. Winter rain and summer heat can shift scheduling on the trades tied to a larger remodel, so we plan around Concord’s seasons rather than promising a date the weather may move.
Book Your KraftMaid Service in Concord, CA
Whether it’s a few doors that won’t close flush or a small kitchen remodel built around KraftMaid cabinets, we’ll diagnose the problem, quote it in writing, and do the work with components that fit. Call (866) 611-9068 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Licensed and insured, with a written line-item quote before any work starts.
Written by the team at Construction Concord.












