







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Concord Homeowners Choose Toto Construction
We provide independent Toto installation, repair and service across Concord, and what sets our Toto work apart is model-level familiarity: we know how a Toto Ultramax II fill valve behaves when it ages, how a Drake II flapper fails, and how a Washlet control board reacts to moisture. We’re not affiliated with or authorized by Toto. We’re an independent provider that works on Toto every week. Our technicians have up to 12 years of experience, and they’ve handled Toto toilets and faucets across Concord’s housing stock, from pre-1992 low-flush models to current high-efficiency Washlet-ready toilets. Call (866) 611-9068 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Concord’s housing stock runs from WWII-era and mid-century tract homes to 1980s subdivisions, and much of the city sits on expansive bay-mud and clay soils that shift with the wet-dry cycle. That matters for Toto work in a specific way: the plumbing inside these homes is often original, and a toilet that rocks, seals badly, or leaks at the base is frequently telling you the flange or the floor beneath it has moved, not that the fixture has failed. A fixture swap on a moving floor just moves the problem. We check the floor and the flange before we sell you anything.
Why Trust Construction Concord for Your Toto Construction?

Our technicians work on Toto products the way a plumber who actually reads the service literature does: they know which failure is a wear part and which one points to something else. A constant-running Toto Ultramax II is almost always a fill valve diaphragm that has stopped sealing – a wearing part that has a correct replacement. A Washlet that stops heating water is usually an electronic control board issue, and that takes a different decision path. Getting that distinction right on the first visit is most of the job.
Every repair uses parts sized for the fixture. We use genuine Toto OEM parts for fill valves, flappers, and flush valve seals, so the fit and service life hold up. For Washlet electronics we may recommend a quality aftermarket control board when the OEM part is discontinued or the price no longer makes sense against the value of the seat. We’re transparent about which path we’re taking and why.
Warranty-safe practice matters too. Opening a fixture, forcing a seized supply connection, or substituting a part that changes flush volume can all affect coverage. We work in a way that keeps your Toto warranty intact where the warranty still applies, and we tell you plainly when it doesn’t. The written estimate sets the final price, and it’s free.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Concord
These are the four failures we see most often on Toto fixtures in Concord, plus the reason each one happens.
- Constant running water on a Toto Ultramax II. The fill valve diaphragm ages and stops sealing, so water trickles into the bowl continuously. You hear it before you see it, and it shows up on your water bill. In Concord’s hard water, mineral buildup speeds up that wear. A fill valve replacement with an OEM Toto assembly usually ends it.
- Phantom flushing on a Toto Drake II. The flapper seal degrades and lets water seep from the tank into the bowl, which triggers the fill valve to top the tank back up. It runs for a second or two at random intervals, often overnight. Replacing the flapper restores the seal.
- Washlet bidet seats that stop heating or responding. The electronic control board takes the hit from power surges or moisture intrusion. Symptoms include a cold seat, dead buttons, or a unit that resets itself. Whether it’s repairable depends on board availability for that seat.
- Weak flush and double flushing on older Toto toilets. The EcoPower flush valve seal wears and the flush loses its push, so people flush twice. That doubles water use and is easy to misread as “the toilet is going bad” when it’s a seal.
- Rocking or leaking at the base. This is the Concord-specific one. Seasonal slab and floor movement from expansive clay soils can break the wax seal or crack a flange, and no amount of tightening fixes a floor that’s moving. The seal has to be reset and the movement addressed.
Toto Parts & Our Repair-vs-Replace Approach

Choosing the right part is half the repair. We match the part to the fixture: genuine Toto OEM fill valves, flappers and flush valve seals for the mechanical side, and quality aftermarket control boards for Washlet electronics only when that’s the honest call. We don’t claim to keep OEM Toto parts in stock. We source what the job needs.
The repair-or-replace question comes down to age and repetition. A toilet under 15 years old with one worn part is a straightforward repair. A toilet over 15 years old on its third or fourth repair, in a home where water costs are climbing, often makes more sense replaced with a high-efficiency model. We’ll lay out both numbers and let you decide. Call (866) 611-9068 to talk through which side of that line your fixture is on – estimates are free.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We confirm the actual failure before quoting anything: fill valve, flapper, flush valve seal, control board, flange, or floor. A running Ultramax II and a leaking base can sound like the same problem and aren’t.
- 2
Repair or install. Water off, tank drained, worn part removed and replaced with the correct fit for the fixture. On a new install we check the flange height and the floor for movement before setting the fixture.
- 3
Test. We refill, adjust the water level, cycle the flush several times, and check the base and supply connections for leaks. A Washlet gets a full function test – heat, wash, dry, controls.
- 4
Warranty and paperwork. We document the parts used and the work performed so your warranty record is clean, and we leave you with a written line-item account of what was done.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Concord
We service and install Toto toilets across the full range found in Concord homes, including the Ultramax II, the Drake II, and older pre-1992 low-flush models, plus current high-efficiency Washlet-ready toilets. On the faucet side we handle Toto kitchen and bath faucets, and we service and install Toto Washlet bidet seats. EcoPower flush valve work on older Toto toilets is routine for us. If you’re not sure what you have, tell us what it does and we’ll identify it. We service Toto as an independent provider, and we’re clear about that.
We Also Service These Brands
Toto is one part of what we do. We also work with KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems, and PGT windows and doors, among 50+ name-brand manufacturers across roofing, cabinetry, countertops, windows, doors, plumbing, fencing, and hardscape. That range matters when a Toto repair turns into a bathroom remodel – one contractor, one point of accountability, no handoff to a roster of unrelated trades.
FAQs – Toto Construction Service in Concord

No. We are an independent Toto service provider and are not affiliated with or authorized by Toto. Our expertise comes from hands-on installations and repairs in Concord, not from manufacturer authorization.
Yes. We use genuine Toto OEM parts for fill valves, flappers, and flush valve seals, and quality aftermarket control boards for Washlet electronics when the OEM part is discontinued or cost-prohibitive. Call (866) 611-9068 for an exact quote – estimates are free.
Most Toto toilet repairs, including a fill valve or flapper replacement, are completed in a single visit. Washlet diagnostics can take longer if a control board has to be sourced. Call (866) 611-9068 to schedule a free estimate and we’ll give you a realistic timeline for your job.
We service and install Toto toilets (including Ultramax II, Drake II and older low-flush models), Toto faucets, and Washlet bidet seats, including EcoPower flush valve work. We’re an independent provider, not a Toto dealer.
Not when the work is done to spec with correct parts. We use genuine Toto OEM parts for mechanical repairs and document what we did, which keeps your warranty record clean. Where coverage no longer applies, we’ll tell you plainly.
Toto work runs from a single repair to a full bathroom remodel, so pricing depends on scope. Typical estimated ranges in Concord are below; the written estimate sets the final price.
| Service | Typical estimated range |
|---|---|
| Bathroom Remodel | $9000 – $28000 |
| Small Bathroom Remodel | $5000 – $12000 |
| Bathroom Vanity Installation | $800 – $3000 |
| Shower Replacement | $3000 – $8500 |
| Tub-to-Shower Conversion | $3500 – $10000 |
Call (866) 611-9068 for an exact quote – estimates are free.
Book Your Toto Service in Concord, CA
Whether it’s a running Ultramax II, a Washlet that stopped heating, or a bathroom remodel built around a Toto fixture, we can help. One contractor, every layer of the job, from the flange up. Call (866) 611-9068. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Concord.












