







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Cabinet Installation Cost in Concord?
Cabinet installation in Concord typically costs $4,000 – $13,000 for a full kitchen, and how much of that you spend depends mostly on the box construction, the door style, and whether the layout is changing. A straight swap of like-for-like boxes sits near the bottom of that range, while semi-custom cabinets with new plumbing, electrical or island work push toward the top. KraftMaid and Wellborn are the two semi-custom lines we work with most, and both give a real spread of price tiers inside one catalog. Whatever the number, the written estimate sets the final price.
Concord’s housing stock is a big part of why that range is as wide as it is. The postwar tracts around Todos Santos and the older homes closer to downtown rarely have square walls or standard cabinet runs, and a 1950s kitchen is usually a different shape than the one the cabinets were designed for. That’s normal. It just means a measuring visit matters more here than it would in a newer build.
Key takeaways:
- Typical installed cabinet cost in Concord: $4,000 – $13,000, materials and labor.
- Semi-custom lines like KraftMaid and Wellborn sit in the middle; stock and fully custom sit at either end.
- Layout changes, new outlets, and appliance relocation are the biggest adders.
- Countertops and backsplash are priced separately, so build them into the total budget early.
- Free estimates, and we answer 24/7 on (866) 611-9068.

Cabinet Installation Cost Breakdown (2026)
Cabinets are priced two ways: by the linear foot of run and by the box itself. Most homeowners in Concord see a mix of both in a single quote, because tall pantry cabinets and a corner lazy Susan cost more than the same footage of base cabinets. Here’s how the line items typically break out for a full kitchen here.
| Line item | Typical estimated range |
|---|---|
| Full cabinet installation (whole kitchen) | $4,000 – $13,000 |
| Cabinet installation as part of a full kitchen remodel | $14,000 – $45,000 |
| Cabinet installation in a small kitchen remodel | $9,000 – $20,000 |
| Countertop installation (paired with new cabinets) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Read the table as tiers, not totals. A homeowner replacing cabinets in place, keeping the same footprint, reusing the same countertop, and choosing a mid-grade semi-custom door will land near the middle of the $4,000 – $13,000 range. Moving the sink, adding an island, or choosing a custom finish schedule pushes the same kitchen toward the upper end. The countertop and backsplash lines are separate because they usually are on the invoice too, and homeowners who budget for cabinets alone are often surprised when the total comes in higher.
What drives cost up most often in Concord: cabinet boxes built for a non-standard opening, appliance relocation, added electrical for under-cabinet lighting, and disposal plus haul-away of the old set. What pulls it down: keeping the existing layout, choosing a shaker or slab door in a stock finish, and reusing the existing countertop where it still fits.
What Affects Cabinet Installation Pricing in Concord
The Concord market has a few pricing factors that show up here more than in other parts of the Bay Area. Here’s what we watch for.
- Cabinet grade. Stock cabinets come in fixed sizes and finishes and sit at the low end. Semi-custom, like KraftMaid and Wellborn, allows non-standard widths, deeper drawers and finish choices, and sits in the middle. Full custom is built to the inch and priced accordingly. Most Concord homes we work on land in the semi-custom tier because the older kitchen shapes need a size that stock doesn’t make.
- Wall and floor condition. Concord’s older homes often have out-of-plumb walls and uneven floors, especially in kitchens that were added onto or remodeled piecemeal over the decades. Leveling cabinets across a floor that’s out by an inch takes shimming and sometimes a subfloor repair, and that’s real labor.
- Layout changes. Moving a sink, range or refrigerator means new plumbing and electrical, sometimes a permit, and always a longer install. Keeping the same footprint is the single biggest cost saver on this list.
- Cabinet count and height. A run of base cabinets only is cheaper than the same footage with uppers, a tall pantry and a microwave surround. Tall cabinets are priced like two cabinets because they’re built heavier and need more than one installer to set.
- Door style and finish. A painted shaker door in a standard color is the value choice. Glazed finishes, inset doors and two-tone kitchens add cost because they add steps and lead time.
- Access and haul-away. A second-floor kitchen, a tight driveway, or a long carry from the street adds labor. So does removing and disposing of the old cabinets, which is worth asking about up front so it doesn’t get added to the invoice later.
One more local note: many Concord homes were built with a peninsula or a pass-through instead of a full island, and homeowners often want to convert to an island. That’s a layout change, not just a cabinet swap, because it typically involves electrical for outlets and sometimes a range hood reroute. Worth flagging early in the estimate so the number you get reflects what you actually want.

Cabinet Installation Cost by Kitchen Size and Scope
Total project cost is the number most homeowners actually need, so it helps to see cabinet installation folded into the larger scope. A small kitchen remodel in Concord typically runs $9,000 – $20,000, and a full kitchen remodel runs $14,000 – $45,000. Cabinets are the largest single line in either budget. Knowing where they sit helps you decide what to trade off.
In a small kitchen, cabinet installation is often $4,000 – $7,000 of a $9,000 – $20,000 total. The rest goes to countertops, backsplash, new appliances if they’re included, and the labor to tie it all together. In a full kitchen remodel, cabinet installation usually lands between $7,000 and $13,000 of the $14,000 – $45,000 total. That leaves room for a new island, a countertop and a backsplash, which is where a lot of the visual payoff comes from.
If you’re still mapping out the whole scope, our kitchen remodeling page walks through how the pieces fit together in sequence. Cabinets come after demolition and rough-in, before countertops and backsplash, and knowing that order helps you plan a phased renovation if you’re not doing everything at once.
That phased approach is where working with a single-source contractor pays off. If you’re also thinking about a bathroom down the road, or roofing or a driveway, our team coordinates those trades so the cabinet install doesn’t leave you hunting for the next contractor. That’s what Construction Concord is built around: one point of contact across the whole house.
Cabinet Installation vs. Cabinet Refacing: Which Costs Less?
Refacing is cheaper. It’s usually a fraction of a new installation because you keep the existing boxes and replace only the doors, drawer fronts and veneer. If the existing cabinet boxes are solid and the layout works, refacing is a real option and worth considering. If the boxes are particleboard that’s swelling, the shelves are sagging, or the layout is the problem, refacing won’t fix any of that. You’d be paying to dress up something that’s failing underneath.
The decision comes down to three questions. Are the boxes solid and square? Is the layout right for how you cook and live? And do you want to change the configuration at all, like adding drawers where there are doors or going to a different height? If the answer to the first is yes and the other two are no, refacing makes sense. If any answer pushes back the other way, new installation is the better use of the budget.
Cabinet installation also gives you access to the full line: drawer inserts, pull-outs, soft-close on every door, tall pantry storage, and a finish schedule that matches the rest of the room. That’s hard to get from a refacing job. It’s also why a new install costs more, and why many homeowners choose it once they’ve seen the numbers side by side. We’ll walk through both in the estimate so you can compare on your actual kitchen.
What’s Included in a Cabinet Installation Quote?
A fair quote should tell you exactly what’s included and what isn’t. Here’s what a full cabinet installation estimate from us covers by default, and what to ask about if you’re comparing quotes.
- Measure and design. On-site measuring and a layout that accounts for walls, appliances, plumbing and electrical. This is where semi-custom sizing comes in, so any non-standard width is caught before the order is placed.
- Cabinets and hardware. The boxes, doors, drawers, hinges, and pulls or knobs. Ask whether soft-close is standard on every door and drawer or an upgrade on specific cabinets.
- Removal and disposal. Taking out the old cabinets and hauling them away. Some contractors price this separately, so check.
- Installation labor. Setting, leveling, shimming, scribing to walls, and installing all cabinets including tall and corner units. Also includes securing the cabinets to studs, which is a code requirement in most jurisdictions, so ask your city’s building department if you’re not sure what applies to your project.
- Appliance openings. Cutting openings for the range, refrigerator and dishwasher, and setting the surround or panel if needed. Hooking up appliances is often a separate line, so confirm.
- Final cleanup. Wiping down and clearing the workspace so the room is usable at the end of the install.
What’s usually not included by default: countertops, backsplash, plumbing connections, electrical rough-in, painting, and any permit fees. Those are separate lines, and they’re worth pricing at the same time so the total budget is accurate. If you’re planning countertops next, our countertop installation page covers the options and the timing, since countertops are templated after cabinets are set, not before.
How to Save on Cabinet Installation
The biggest savings come from decisions made before the cabinets are ordered, not after. Here’s what actually moves the number.
- Keep the layout. Moving the sink or range is the single largest adder. If you can live with the current footprint and just refresh the cabinets, you’ll stay near the low end of the $4,000 – $13,000 range.
- Choose semi-custom over full custom. KraftMaid and Wellborn both offer stock sizes with semi-custom modifications where they matter. You get the fit without the full-custom price tag.
- Limit the number of finishes. One finish across the whole kitchen costs less than a two-tone scheme or a glazed finish, because it’s fewer steps and fewer lead-time dependencies.
- Don’t skip the measuring visit. In Concord’s older homes, a non-standard width discovered after the order arrives is an expensive fix. Catching it before the order is free.
- Bundle other projects. If you’re also thinking about a bathroom, a roof, windows or a driveway, doing them with one contractor at once usually costs less than doing them separately, because mobilization and coordination happen once.
Free estimates, no obligation, and a written quote that itemizes the same lines listed above. Call (866) 611-9068 and we’ll book a measuring visit.
Why Choose a Full-Scope Contractor for Cabinet Installation?
Cabinet installation touches the room in more ways than homeowners expect. Plumbing for the sink, electrical for outlets and under-cabinet lighting, appliances that need openings cut to the right size, and a countertop that’s templated after the cabinets are set. When those are handled by five separate contractors, the seams between them are where delays and finger-pointing happen. When one contractor coordinates all of them, the sequence is planned from day one.
Our technicians have up to 12 years of experience, and the cabinet work we do is backed by real product lines: KraftMaid and Wellborn for cabinets, Cambria, Silestone and Caesarstone for countertops when those are part of the same scope. That brand access matters at the estimate stage, because it means we can price two or three real options instead of pushing a single line. Built to the brand’s standard, installed to ours.
Concord kitchens are also rarely just kitchens. A homeowner replacing cabinets often discovers the bathroom down the hall needs work, or the roof is near the end of its life, or a driveway is cracking. That’s where one contractor across bathroom remodeling, roofing, and driveway and pavers makes the planning realistic. Same for windows and doors, which matter if the kitchen layout change includes moving one.
We serve the whole Concord area, and the surrounding towns work the same way. If you’re just over the hill in Walnut Creek, down toward Pleasant Hill, or out toward Martinez, the installation process is the same and the pricing is set by the written estimate for your specific kitchen.
Signs It’s Time for New Cabinets
Some cabinet problems are cosmetic. Others are a sign the boxes are failing. Here’s how to tell the difference before you spend on a refacing job you’ll regret.
- Soft or swollen boxes. Particleboard that has swelled from a leak or years of steam near the sink won’t hold a hinge, no matter how many times you tighten it. That’s a replacement, not a repair.
- Sagging shelves. A shelf that bows under normal weight means the box can’t carry the load. New cabinets with plywood or heavier box construction fix it.
- Doors that won’t stay closed or aligned. Sometimes this is a hinge, sometimes the box itself is out of square. Worth having someone look before you decide.
- A layout that doesn’t work. Not enough drawers, no tall storage, a corner that traps everything. Refacing doesn’t change any of that.
- Wear at the high-touch points. Finish rubbed off around the pulls, delamination at the edge banding, water stains under the sink. These usually mean the whole set is at the end of its life.
If two or more of those are true, a full installation is likely the better spend. If none of them are, refacing or even a refinish is worth a conversation.
FAQs – Cabinet Installation Cost
How much does cabinet installation cost in Concord?
Cabinet installation in Concord typically costs $4,000 – $13,000 for a full kitchen, including materials and labor. The lower end is in-place replacement with stock or entry-level semi-custom cabinets; the upper end includes non-standard sizes, tall cabinets, island work, or electrical and plumbing changes. Call (866) 611-9068 for an exact quote on your kitchen – estimates are free.
Is it cheaper to reface or replace kitchen cabinets in Concord?
Refacing is usually cheaper, often at a fraction of a full cabinet installation, because you keep the existing boxes and only replace the doors, drawer fronts and veneer. But if the boxes are swollen, the shelves are sagging, or the layout is the problem, refacing doesn’t fix any of that and new cabinets are the better use of the budget. Call (866) 611-9068 and we’ll tell you honestly which makes sense for your kitchen – estimates are free.
How much does a kitchen island add to cabinet installation cost in Concord?
A kitchen island installation in Concord typically runs $3,000 – $10,000 on top of the base cabinet cost. The spread comes from size, cabinet count, whether there’s seating on one side, and whether electrical for outlets needs to be run to the island location. Call (866) 611-9068 for an island quote alongside your cabinet estimate – both are free.
How long does cabinet installation take in Concord?
A typical full kitchen cabinet installation takes one to three days of install time once the cabinets are on site. The lead time for semi-custom cabinets, like KraftMaid and Wellborn, is usually several weeks between order and delivery, so the total timeline from signed estimate to finished kitchen is longer than the install itself. Call (866) 611-9068 to talk through timing for your project – we’ll give you a realistic schedule with the estimate.
Can you install cabinets and countertops at the same time?
Yes, and it’s usually the better way to do it. Cabinet installation in Concord typically ranges $4,000 – $13,000 and countertop installation typically ranges $2,000 – $6,500, and when both are handled by one contractor the countertop templating is scheduled right after the cabinets are set, so there’s no waiting between trades. Call (866) 611-9068 to combine them into one estimate – free, and itemized line by line.
Get a Cabinet Installation Estimate in Concord
If you’re planning new cabinets, the fastest way to know what it will cost is a measuring visit and a written quote. We’ll look at the existing layout, flag anything that will affect the install, and price two or three real cabinet options so you can compare on your actual kitchen, not a catalog. The estimate is free, the price is set per job, and the written estimate sets the final number.
Call (866) 611-9068. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re still in the planning stage and want to compare cabinet installation with a bigger kitchen scope, our small kitchen remodel page and our backsplash installation page both cover the neighboring decisions. If your project might eventually include an addition or ADU, our home additions and ADU team can plan that alongside the kitchen. And if you’re also considering windows or a door as part of the layout, our windows and doors page covers the product lines we work with. Fence and hardscape questions are covered on our fence installation page. For nearby homeowners in Concord, we work the same way.
Pricing reflects the Concord market as of 2026. Construction Concord offers free estimates – call (866) 611-9068.
What Our Customers Say
"Every inspection passed first time. The building department clearly knows him and that made the whole process easier."
- Rafael Ramirez"He was upfront about a soil issue that added cost early rather than absorbing it and surprising us at the end."
- Norma Salazar"He caught an error in the engineer's drawings before it got framed, which would have been an expensive thing to discover later."
- Henry Wong












