







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Driveway & Pavers for Concord Homeowners
Concord’s clay soils and long dry summers are hard on a driveway. Ground that swells in a wet winter and shrinks by August will crack a thin slab or shift a poorly based paver field within a couple of seasons, and that’s before the summer sun bakes a bare concrete surface pale and dusty. We build driveways and hardscape for Concord homes knowing the base matters as much as the surface, and we match the material to how your driveway actually gets used. Our technicians have up to 12 years of experience, and we work with multiple paver lines rather than pushing one. Call (866) 611-9068 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.

What Our Driveway & Pavers Service Includes

Paver Driveways
A paver driveway is a designed surface made from interlocking brick or stone units set on a compacted aggregate base and sand bedding. It’s the right choice when you want a specific look, need the surface to flex slightly with soil movement, or expect to repair sections later without tearing out the whole drive. We work with Belgard, Tremron and Techo-Bloc, lay out the pattern and border with you before install, and compact in lifts so the field stays flat under a car for years.
Concrete Driveways & Concrete Work
Concrete stays the most straightforward choice for a clean, flat driveway, and it’s also the least forgiving of a bad base. A pour over uncompacted Concord soil will crack along the same lines the ground moves. We set control joints deliberately, pour at a workable thickness, and finish the surface so it drains away from the garage rather than pooling at the door. That same concrete work covers aprons, steps, curbs and patching where the drive meets the street.
Asphalt Driveways & Resurfacing
Asphalt is the budget-friendly option and the easiest surface to refresh. A new asphalt drive goes in compacted and smooth, and later resurfacing can add years to a drive that’s still structurally sound underneath. We check the base first, because paving over a failed sub-base just moves the cracks up a layer. If your asphalt is alligatored or holding water in low spots, we’ll tell you whether a resurface makes sense or a full replacement does.
Driveway Repair & Replacement
Some drives need a repair, not a rebuild. Settled sections, a cracked apron, a bad joint, or pavers that have heaved out of line can often be lifted and reset or patched to match. When the base has failed across the width of the drive, replacement is the honest answer, and we’ll show you what we found rather than quote a full tear-out on a driveway that doesn’t need one. Either way, the written estimate spells out exactly what gets removed and what goes back.
Patios, Walkways & Pool Decks
The same hardscape skills that build a driveway build a patio, a front walk or a pool deck. These surfaces sit where people walk barefoot and where water needs to run off, so we grade them away from the house and use a slip-resistant finish on wet areas. Brick, stone-look pavers and poured concrete all work here, and we’ll match the patio to the driveway so the front of the house reads as one design instead of three separate jobs.
Brick Paver Driveway
Brick pavers give a Concord driveway a look concrete can’t match, and they’re genuinely repairable: a stained or damaged unit lifts out and a new one drops in. The catch is the installation. Brick needs a properly compacted base and edge restraint or the field will creep and spread at the edges. We set edge restrictions and cut the border units tight so the pattern holds at the driveway’s edge where the tires hit hardest.
Stamped Concrete Driveway
Stamped concrete gives you the look of stone or brick at a concrete price, pressed into the slab while it’s still workable. It’s a good fit for homeowners who want pattern and color without the joints of a paver field. The trade-off is that repairs are harder to blend than pavers, so the base prep and joint layout have to be right the first time. We pour and stamp in one continuous operation and seal afterward to protect the color.
Driveway Sealing
Sealing protects a driveway from sun, water and stains, and it’s the cheapest way to extend the life of a surface that’s still in good shape. Asphalt and stamped concrete both benefit; a sealed surface sheds water instead of absorbing it. We clean and prep first, because sealing over dirt or a damp slab traps the problem underneath. This is a small job with a real payoff, and we’ll tell you honestly when a drive is too far gone to be worth sealing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Driveway & Pavers
We work with Tremron and Techo-Bloc across driveway and patio projects, and knowing how each line behaves on a Concord base matters. Tremron’s modular units give a consistent field that lays flat and stays flat when the base is right, and we use them where a homeowner wants a clean, uniform look. Techo-Bloc offers more texture and dimensional variation, which suits patios and front walks where you want the surface to read as natural stone. Cambridge Pavers round out the options when a specific color or border system is the deciding factor.
Each manufacturer publishes its own installation spec, and we build to it rather than guessing. That means the right bedding depth, the right compaction and the right edge restraint for the product going down, so the warranty behind the material isn’t undermined by the install. Whether you’re drawn to Tremron, Techo-Bloc, Cambridge Pavers or any other make, we can help you choose and install it to spec.

Signs You Need Driveway & Pavers Right Now
- Cracks that keep widening. A hairline crack is normal. A crack you can fit a coin into, running the length of the drive, usually means the base has moved underneath. Sealing the crack hides it; fixing the base solves it.
- Pavers heaving or sinking in one spot. When a section of pavers sits proud or dips low, water is getting under the field and washing out the bedding. Left alone, the problem spreads outward from that spot with every rainy season.
- Ponding after rain. Water that stands on the driveway hours after the rain stops is a grading problem, not a drainage-afterthought. Standing water works its way into joints and under the slab, and it’s a slipping hazard in winter.
- Crumbling edges and a broken apron. The edge where the drive meets the street takes the most load and the most water. When it crumbles, the rest of the drive starts to lose its restraint and the field opens up.
- A surface that’s gone pale, dusty or rutted. Sun-bleached concrete and rutted asphalt are both signs the top layer has given up. Resurfacing or sealing now is far cheaper than replacing a drive that fails completely.
Our Driveway & Pavers Process – Step by Step
- 1
Site visit and measurement. We walk the driveway with you, measure the area, check the slope toward the street and the garage, and look at how water currently drains. We also look at what’s underneath where we can, because the base tells us more about the job than the surface does.
- 2
Material and layout planning. We bring samples from the paver lines and talk through pattern, color and border, or walk through concrete finish and joint layout if that’s the direction. You see and touch the material before anything is ordered.
- 3
Written estimate. You get a line-item quote covering demolition, hauling, base prep, material and finishing, with the price fixed for the scope described. The written estimate sets the final price, and there are no change orders for work already in the quote.
- 4
Demo and base prep. We remove the old surface, excavate to depth, and compact the aggregate base in lifts. This is the step that decides how the driveway performs, so we don’t rush it, and we grade for drainage before anything goes on top.
- 5
Install, clean-up and walkthrough. The surface goes down, edges get restrained, joints get set and the site gets cleaned. We walk the finished driveway with you, explain how to care for it, and leave you with the care guidance for your specific material.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Driveway & Pavers Cost in Concord?

A typical paver driveway installation in Concord runs $7,000 – $18,000 depending on square footage, pattern complexity and how much base work the site needs. Concrete driveway installation typically lands between $4,500 and $12,000, and asphalt driveway paving runs $3,500 – $9,000. If the existing drive has to come out first, driveway replacement generally runs $5,000 – $14,000. A paver patio installation is estimated at $3,500 – $11,000, and driveway sealing is the small job at $250 – $700.
What moves the price most is the base, not the surface. A flat, well-draining site with easy access costs less than a steep drive that needs retaining, hauling or extra excavation. Material choice matters too: asphalt sits at the low end, pavers at the high end, and stamped concrete falls in between. The way to avoid overpaying is to get a written line-item estimate that separates demo, base, material and finishing, so you can see what you’re actually paying for. Our estimates are free, and the written estimate sets the final price, so the number on the page is the number on the job.
Driveway & Pavers Near Concord – Our Service Area
We work on driveways and hardscape throughout Concord and the surrounding towns, including Pleasant Hill, Walnut Creek, Martinez, Lafayette, Alamo, Moraga, Orinda, Benicia, Hercules, Rodeo and Piedmont. Scheduling depends on the project, and we’ll give you a realistic start window when we quote. If you’re comparing options across the area, take a look at our driveway & pavers work in Pleasant Hill and driveway & pavers in Walnut Creek, or start with our main driveway & pavers page. Call (866) 611-9068 to book a free estimate.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Driveway & Pavers in Concord

It’s the design, installation and repair of the hard surfaces around your home: the driveway itself, plus patios, walkways and pool decks. It covers new pours and paver fields, resurfacing, repairs and sealing. We handle all of it, so a driveway, a front walk and a patio can be planned and built together. Call (866) 611-9068 to talk through what your property needs.
Most driveway projects run a few days to about a week, depending on size and material. A seal coat is usually a single day, a concrete or asphalt pour takes a few days including cure time, and a large paver field with border work takes longer. We give you a realistic timeline in the written estimate. Call (866) 611-9068 for an exact schedule.
Typical estimates here run $7,000 – $18,000 for a paver driveway, $4,500 – $12,000 for concrete and $3,500 – $9,000 for asphalt. Replacement generally runs $5,000 – $14,000, and sealing runs $250 – $700. Your actual price depends on size, base condition and material. The written estimate sets the final price. Call (866) 611-9068 for a free quote.
Yes. We install Tremron, Techo-Bloc and Cambridge Pavers, along with other lines, and we build to each manufacturer’s installation spec. That means the right base and bedding for the product, so the material’s warranty isn’t undercut by the install. Call (866) 611-9068 to see samples from the lines we work with.
We can often assess a driveway problem the same day you call, depending on the schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 611-9068 to find out what’s available.
We back our installation work, and the manufacturer backs the material under its own warranty. The exact terms depend on the product and the scope, and we spell them out in the written estimate before work starts. If something isn’t right after install, we come back and make it right. Call (866) 611-9068 to go over the details for your project.
Clear vehicles and anything parked on the drive before we arrive, and plan for the driveway to be out of use during install and cure. If you have a gate or a fence in the work area, let us know so we can coordinate. Beyond that, we handle demo, hauling and clean-up. Call (866) 611-9068 if you have questions about access or timing.
Schedule Your Driveway & Pavers Service in Concord Today
A driveway is the first thing anyone sees of your home and the surface that takes the most wear. Whether you’re replacing a cracked slab, planning a paver field, or sealing a drive that’s still got life in it, we’ll walk the site, show you the materials, and give you a written line-item estimate at no obligation. Call (866) 611-9068. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One contractor, every layer of your home.
Written by the team at Construction Concord.












